![background image](http://html1.mh-extra.com/html/gasboy/islander-prime/islander-prime_instruction-and-installation-manual_3666678053.webp)
MDE-5411A ForeHB Islander Prime Installation Manual · October 2018
Page 41
5.3 Installing the Pedestal Base
Installation
5.3.5 Pedestal
To install the pedestal, proceed as follows:
1
Remove the four M10 nuts from the four bolts attached to the bottom plate
).
Figure 20: Pedestal Base Installation
2
Remove the front panel of the pedestal base to enable you to reach the bolts inside.
3
Install the pedestal base on top of the bottom plate (step 4 in
).
4
Anchor the pedestal base onto the base plate with the four bolts protruding from the inner
ground.
5
Secure the pedestal base to the base plate with four M10 flat washers and M10 nuts
).
Содержание Islander Prime
Страница 4: ...This page is intentionally left blank...