GAS GAS WILD HP 450-07, Руководство пользователя

Страница: 92 / 142

Check that the brake pedal height is correct. If not, have it adjusted
at a specialised workshop.
Check the operation of the lever and pedal. They must move smoothly
and must feel firm when the brakes are applied. Otherwise, have a
specialised workshop inspect the vehicle.
Brake liquid level
Check the brake liquid level. Add liquid if necessary. (See the
Maintenance section of the manual)
Recommended fluid D.O.T 3 or D.O.T 4
NOTE
The fluid issued at the manufacturers is D.O.T.4.
Brake liquid leaks
Check for brake fluid leaks in the brake line joints or fluid reservoirs.
Apply the brakes firmly for about one minute. In case of a leaking,
have a specialised workshop inspect the vehicle.
VERIFICATIONS TO BE MADE BEFORE STARTING THE
VEHICLE
WARNING
Always inspect the QUAD before use, to ensure it is safe to operate
without any danger.
Always follow the inspection and maintenance procedures and
programs described in this manual. Failure to inspect the machine
increases the risk of accident or breakdown.
FRONT AND REAR BRAKES
WARNING
Before driving, always check the brakes. Do not drive the QUAD
there is any braking problem or if a loss in braking capacity is
possible, this could result in an accident. If there is any problem that
cannot be solved using the procedures described in this manual, go
to a specialised workshop to have the QUAD checked.
Disc and disc pad wear is automatically compensated for and has
no effect on the brake lever or pedal action. So there are no parts
that require adjustment on the brakes except brake lever play and
the brake pedal position and play.
Brake lever and pedal
Ensure that there is no play in the front brake lever (1) . If so, check
the condition of the brake pads and consult the “ Adjustments and
maintenance ” section.
Check there is no free play in the front brake lever (2) .
-
20
-
1
2