Adjusting the spring
- Remove the seat, right and left side number plates.
- Loosen the air cleaner duct clamp screw.
- Remove the silencer.
- Remove the rear subframe with the air cleaner box.
EC FSE 2004 -
100
-
(A). Rear Subframe
(B). Air Cleaner Box
(A). Compression dampening adjuster
Suspension spring
The standard spring is a 4.0.
The standard spring preload length is 258 mm
.
- Tighten the locknut (ring) securely.
- After adjustment, move the spring up and down to make sure that
the spring is seated.
- Install the parts removed.
Rear Shock Absorber Spring Replacement
In addigtion to the standard spring, harder and softer springs are
available. If the standard spring is improper for your purpose, select
a proper one according to the rider´s weight or course conditions.
. Using the harder spring:The spring rate is higher.
. Using the softer spring:The spring rate is lower.
NOTE
Look at page 47.
(B)
(A)
(A)
(C)
(B)
(A). Adjusting
(B). Spring
(C). Lock nut (ring)
(A)
