Multi Gas Clip Simple User’s Manual
V1.0
4
Portable gas detectors you can count on.
6
of 20
Basic Operation
Button Usage
The following operations are driven by a single
p
ower/
m
enu
b
utton
located on the front of
the instrument:
•
Turning
on the
detector
•
Menu navigation
o
Main Menu
o
Status
Menu
o
Option
Menu
•
Bump testing
•
Calibration
•
Latched Alarm acknowledgment
•
Back-light
activation
Turning On the Detector
To activate the detector, press and briefly hold down the power/menu button.
Upon
act
ivation
, the
DODUPEDUVwill IODVKWKHGHWHFWRUZLOOYLEUDWHDQGDVWDUWXSWRQHZLOOVRXQG
while the detector self-
WHVW
s the
YLVXDOYLEUDWLQJDQGDXGLEOHDODUPV
.
G
as readings
will begin
to display
immediately. Each sensor will show
a chasing “
0
” for the sensor reading while it is
stabilizing and being self
-tested.
Once all sensors have completed the warm up and
stabilization sequence (< 65 seconds), the detector is ready to detect all applicable gases.
Chasing “0” - stabilizing
Fully operational
Turning Off the Detector
This
detector
is not designed to be turned off. Once activated, it will run continuously
for
24 month
s.