Garudan GPS/F-1006 Series, Руководство по программированию для пользователя

Страница: 83 / 114

Pattern Operation
79
①
Select Load Pattern
In the standard interface, press to activate
the interface of pattern load.
②
Select the Pattern for Loading
The existed pattern number will be shown at area
A. Select the wanted number (the selected will be
displayed in dark).When there are more than 20
patterns in storage, the Page Key will be
displayed. Press that key to change the pattern
shown at Area A.
Instruction
:
１、 Press Pattern Information Key (F) to activate
the preview interface of pattern. Press to
return to the pattern load interface.
２、
press Key E to select whether to delete the
jump feed up to the sewing at the time of pattern
data reading. The present setting statue is
displayed on the jump feed load key. And the
setting is changed over alternately at each
pressing.
:jump feed load
:jump feed cancellation
③
Specify Direct Pattern Number
Select Pattern Number Specifying Key (C) to
activate the interface for specifying the pattern
number. Use Number Keys (H) or +/- Keys (I) to
input the pattern number. Press +/- to input the
pattern number next to the pattern being inputted
right now.
Press ENTER (J) to return the load interface
under the status that the inputted pattern number
is selected.
④
Performance of the Pattern Load
Press ENTER (D) to load the selected pattern data
and the system returns to the standard interface.
(2) Set the Scaling Rate
www.garudan.cz