Garudan GPS/F-1006 Series, Руководство по программированию для пользователя

Страница: 60 / 114

Input of Pattern
56
②
Input Angle Point in Normal Sewing
At normal sewing, the inputted points are
determined by the element type before the point
which is under the operation of Key B
Select normal sewing (code 022) ; in
coordinate input interface, use Key B to input
points 1, 2, 5, and 7, use Key A to input point 3, 4
and 6. At this moment, the point 2 is the normal
deciding point (number of shape 1) since
the point that one before point 2 is the linear
sewing. And the point 5 &7 are the angle points
(number of shape point +2), since the point before
the point 5 & 7 is the curve sewing.
③
Correct Shape Point at Angle Point
The angle point overlaps 2 shape points; therefore
user needs to pay attention when correcting the
shape point (“5-8. Correction of Shape Point”p.73)
Select Shape Point Move (Code 136)
and then choose the shape point for
moving. Press Forward Key D to have access to the
selected shape point. After that, angle point (R
Point) has two shape points.
After making R point move to S point, user can
select the shape point rear 2 or front 3 so as to
change the result.
The result when rear 2 is moved
www.garudan.cz