Gartenmeister GM AKS 4030, Руководство по эксплуатации

Страница: 25 / 64

GB |
Operating Instructions
5
of work in each case. The use of the
suitable power tool within the stated
range of performance makes working
more effective and safer.
b) Do not use a power tool with a dam-
aged switch. A power tool that cannot
be switched on or off any more is dan-
gerous and must be repaired.
c) Pull the mains plug and/or remove
the battery before adjusting a tool,
changing accessories or putting the
tool aside. This precaution avoids the
unintentional start of the tool.
d) Store power tools that are currently
not used out of the reach of children.
Do not allow persons to use the tool
if they are not familiar with the tool
or these instructions. Power tools are
dangerous if used by inexperienced
persons.
e) Thoroughly maintain your power
tool. Check whether moving parts
are working properly and are not
jamming/sticking, and whether parts
are broken or otherwise damaged in
a way that may affect the function of
the power tool. Have damaged parts
repaired before using the tool. Many
accidents are the result of poorly main-
tained power tools.
f) Keep cutting tools sharp and clean.
Thoroughly maintained cutting tools
with sharp cutting edges are jamming
less often and are easier to guide.
g) Use power tools, accessories, add-
on tools, etc. in accordance with
these instructions and in the way
prescribed for the respective type of
tool. You should also consider the
working conditions and the work to
be carried out. The use of power tools
for purposes other than those intended
for the respective tool may result in dan-
gerous situations.
5) Battery tool use and care
a) Recharge only with the charger spec-
ified by the manufacturer. A charger
that is suitable for one type of battery
pack may create a risk of fire when
used with another battery pack.
b) Use power tools only with specifical -
ly designated battery packs. Use of
any other battery packs may create a
risk of injury and fire.
c) When battery pack is not in use,
keep it away from other metal ob-
jects, like paper clips, coins, keys,
nails, screws or other small metal
objects, that can make a connection
from one terminal to another. Short-
ing the battery terminals together may
cause burns or a fire.
d) Under abusive conditions, liquid
may be ejected from the battery;
avoid contact. If contact acciden-
tally occurs, flush with water. If liq -
uid contacts eyes, additionally seek
medical help. Liquid ejected from the
battery may cause irritation or burns.
6) Service
a) Have the power tool serviced by
qualified technical personnel only;
repairs should be carried out using
exclusively original spare parts. This
will ensure the continued safe operation
of the power tool.
7) Safety instructions for chain saws
• Keep all parts of your body clear of
the chain while the saw is running.
Before starting the saw, make sure
that the chain does not touch any ob-
jects.
When working with a chain saw,
even a short moment of inattentiveness
may result in clothes or parts of the
body being caught by the chain.
• Always hold the chain saw with your