4
-
Make sure that the wheels are installed in compliance with the manufacturer’s instructions;
- Make sure that the abrasive product is correctly mounted and clamped before use and use the tool
off-load for 30 s in a safe position, stop it immediately if important vibrations are produced or if other
defects are detected. If this happens, check the tool to determine the cause.
- If a protector is supplied with the tool, never use the tool without its protector;
- Make sure that the sparks related to use do not present danger, for example by reaching people or
by striking flammable substances.
- Make sure that the air vents are unobstructed when working under dusty conditions. If removing
the dust becomes necessary, first unplug the tool from the power supply.
- Always use safety goggles and hearing protections. It is advisable to use other individual protection
equipment, such as respirators, gloves, helmets and aprons.
- Grinding wheels continue to rotate after the motor stops.
- If the power supply cable is damaged, it should be replaced by the manufacturer, his after sales
service or people with similar qualification so as to avoid danger.
- No water supply used.
ADDITIONAL RECOMMENDATIONS
Environment to be respected:
1) The ambient temperature should be between 15°C and +40°C.
2) The humidity should not exceed 90% under a temperature of 25°C.
3) Only use grinding wheels reinforced with organic bond, (80m/s).
6) Unplug the tool before handling it (including the changing of wheels).
7) Do not brutally apply the part to sharpen on the grinding wheel, or exert too important effort when
sharpening.
8) If the rotation speed lessens abnormally, immediately stop the tool and unplug it.
INTEND USE
Sharpen Axes and similar farming tools.
Sharpen knives and other types of blades of kitchen.
Sharpen scissors.
Sharpen drills.
TECHNICAL FEATURES
Power supply: 240v~ 50Hz
Wattage: 150 W
Protection against electric shocks of class II:
Max. Speed: 5500 /min
Weight: 1.7kg
Noise: Max.L
PA
=81.56dB(A), K
PA
=3dB(A), L
WA
=94.56dB(A), K
WA
=3dB(A)
