8
Maintenance and Service
Warning! Remove the plug before carrying out any adjustment, servicing or maintenance.
Regular cleaning
1. Always take out the
dust collection boxes
and clean them after each using.
2. Special cleaning task should be down by a qualified person.
Service
1. To change the Grind wheel, screw out the reference screws and using the same grind wheel from the
manufacturer.
ATTENTION: Do not use a grind wheel with different specification or from other manufacture!
This may cause injury. Service should be carried by a qualified person.
To get a drill clearance (for drills exceed
φ
10mm):
Insert the holder with drill into the sharpen hole.
Remove the drill-holder from the hole and turn the holder
180
°，
reinsert, to get the other crest sharpened.
The
rib on the holder
should fit in the
slot on the guide.
H
Dust collection boxes
Grind wheel
Grind wheel
