Graphic Target Imaging 2500 - 11
2. Place the threaded bolt through the
holes in the connector and hand-tighten
using the remaining wing nut
(above left)
.
Use no tools.
. Depress buttons in the Control Housing
stem and slide on the Upper Stem.
. Depress the buttons in the Lower Stem
and insert it into the Upper Stem
(above
right)
. Buttons will pop into the holes, and
you can achieve the desired stem length.
The third set of holes from the end is most
commonly used.
5. As shown, wrap searchcoil cable securely
around stem and connect to detector. The
first cable turn goes over the top of the
stem. The cable should be snug but still
Содержание GTI 2500
