GARO TFA4500-3D, Руководство пользователя

Страница: 28 / 40

USER’S MANUAL
-
24
-
Change the oil as follows:
●
Lower the lift completely.
●
Make sure that the hydraulic cylinder is fully
retracted.
●
Disconnect the power supply.
●
Drain the oil from the circuit by unscrewing the drain
plug at the bottom of the reservoir.
●
Refit the drain plug.
●
Fill the reservoir through the filler hole on the top.
●
Make sure the oil is filtered.
●
For oil types and characteristics refer to the technical
specifications
(chapter 2, page 9) .
●
Close the filler plug.
●
Connect the lift to the power supply.
●
Perform two or three lift—lowering cycles (to a height
of 20 - 30cm) in order to fill the circuit with oil.
Oil changes: use only recommended oil brands or
equivalents; never use oil that has deteriorated because of
excessively long storage.
Dispose of used oil as indicated in Appendix “A” .