GARO LS4 43kW, Руководство по установке

Страница: 3 / 22

ABOUT THIS MANUAL
INFORMATION
This document contains general descriptions which are verified to
be accurate at the time of printing. However, because continuous
improvement is a goal at GARO, we reserve the right to make
product and software modifications at any time. This range is
subject to continual product development. Errors, typos and
omissions excepted. Latest manuals can always be found at
https://www.garo.se
GARO LS4 is an EVSE station for Mode-3 AC charging up to
43kW.
Below are some example of standard features:
• Fixed cable for Mode-3 EV charging.
• Suitable for installation on ground.
• LED status indication.
• Upgradeable firmware*
• Visible energymeter
• OCPP via 4G or LAN*
• RFID reader for secure authorization (not activated as default)*
LS4 supports following features:
• External DLM energy meter*
• Cluster installation of multiple LS4 via Ethernet*
• Cluster installation of multiple LS4 MINI, LS4 and GLB+ via
Ethernet*
* Require certified technician
SAFETY INFORMATION
The LS4 stations are designed exclusively for charging
electric vehicles.
All installation must be carried out by an authorized
installer and comply with local country installation
regulations. If any questions, please contact your local
electrical authority.
Refer to local standards and regulations not to exceed
charging current limitations.
To even out the load, it is important to rotate the phases
when connecting several of LS4 stations to the same
system. Note that 1-phase charging is common in electric
vehicles and L1 (left side) and L2 (right side) in the LS4 is
used for this purpose.
Ventilation signal from EV is not supported. This means that
test of “State D” is not possible.
Adapters for charging connectors are not allowed to be
used.
Cord extension sets for charging cable is not allowed to
be used.
Do not use private power generators as a power source
for charging.
Incorrect installation and testing of the LS4 stations could
potentially damage either the vehicles battery and/or the
LS4 itself.
Do not operate the LS4 stations in temperatures outside its
operating range – see technical specifications.
INFORMATION
3
EN