GARO LS4 43kW, Руководство по установке

Страница: 10 / 22

NO LIGHT
Charging station and internal
meters are powerless.
The upstream circuit breaker have been triggered.
4-pole main circuit breaker inside the bottom of charging station
is deactivated.
Charging station is powerless
(no LED light), but the internal
meters have power.
1-pole main circuit breaker inside the bottom of charging station
is deactivated.
The 12V power supply unit is deactivated (Green LED-light [DC
OK] on 12V supply unit is not lit).
Upper PCB is not receiving power (DC 12V).
The 12V power supply unit has power, but the charging
controller/controllers still do not indicate green on LED-light
[Ready]. When operating normally, the LED-light should show
blinking green.
LED light indication When Cause of error
LED light indication Measure 1 Measure 2
Firm
No error
Have you tried everything
without success? Contact
installer or GARO Support
(please have M-number
available)
Check car settings that can influence charging, i.e gear in
parking mode, doors closed, car locked etc.
Present a valid RFID to the RFID card reader (look for RFID
symbol), start charging via mobile app or contact charging
station operator to start charging remote via backend.
If the charger is supposed to work without RFID/app
authentication, contact the backend operator and ska them to
verify that "Free charging" is set to ON.
Blinking (3 blinks)
Connect the charging cable to the vehicle, or verify that cable is
connected correctly. If no success, try a different charging cable
if available.
Blinking (30
second blink)
Connect the charging cable, or verify that cable is connected
correctly.
Firm
No error
Have you tried everything
without success? Contact
installer or GARO Support
(please have M-number
available)
No error
Blinking
No error (contact backend operator if this is not the desired
mode)
USER INSTRUCTIONS
10
EN