Garnet SEELEVEL II 709-4LP, Руководство пользователя

Страница: 22 / 24

Page 22 7094LP Manual
CHAPTER 9 - SPECIFICATIONS
Resolution: 3/8 inch (10 mm)
Accuracy: +/- 8% or better, limited by resolution and
tank height and shape
Temperature range: +32 to +140 oF (0 to + 60oC)
Sender materials: 0.008” thick glass epoxy circuit board with
conformal coating for circuit protection.
Laminated on the back with 3M 300LSE
Bonding Adhesive.
Sender length range: 4-1/2 to 12 inches, which will measure tank
heights from 5” to 14” (single sender) and up
to 26” (dual senders).
Display mounting panel: Black panel, approximately 4”” wide by 2.8”
high by 1” thick (102mm wide X 71mm high
X 25mm deep). Panel screws to wall.
Power requirements: Display requires 12 volts from the RV battery,
the system will function from 11 volts to 16
volts. Current drain is less than 200mA.
Wiring: A single two wire conductor required from
the display to the senders. All the senders
are wired in parallel. 12 V power and ground
required for display.
LPG sender: Display will work with an LPG sender
resistance of 0-50 ohms to 0-500 ohms.
Display shows increasing level as resistance
increases. System must be calibrated with
the LP tank full.