Step 3
– Install the drivers and establish an Internet service connection
ADSL CONNECTION MODE SELECTION
The GAN-1021 Multi-Mode Drivers will automatically determine the ADSL connection mode supplied
by your ADSL service provider. If for any reason you require a mode setting different from the
automatic default setting, you can manually set the mode as required. Please refer to
Appendix E –
ADSL Configuration
–
Select Protocol/Mod
e. The connection mode is one of the following:
"
ITU G.992.1 (G.dmt) ………....referred to as
G.dmt
"
ITU G.992.2 (G.lite)……….......referred to as
G.lite
"
ANSI T1.413 ………..................referred to as
ANSI
DRIVER INSTALLATION AND INTERNET SERVICE CONNECTION
Refer to the following chart and locate your connection protocol with your corresponding
Operating System (OS). Then proceed to the appropriate section/page.
!
NOTE:
You may need the Microsoft Windows Operating System installation files (CAB files) to
complete the installation. The CAB files are contained in the Microsoft’s system CD-ROM. Some
systems may have already installed the CAB files to the hard drive, but you should have the
Microsoft Windows CD-ROM handy just in case..
RFC 2364 – POINT TO POINT PROTOCOL OVER ATM – WINDOWS 98, 98A
system and turn the power on.
1. The
Add New Hardware Wizard
window will automatically appear and indicate that a new
PCI Network Controller
has been found. Click
Nex
t.
2. Still in the Add New Hardware Wizard. You will be asked
“What do you want Windows to
do
?” Select
“Search for the best driver for your devic
e”, then click
Nex
t.
3. Insert the CD labeled
GARNET SYSTEMS CO.LTD. GAN-1021 Drivers
into your systems CD-
ROM drive.
4. Then select
Specify a location
and in the text entry bar type in your systems CD drive
location letter (
D
for example ), followed by a colon (
:
), then a back slash (
\
), followed by
the RFC 2364 driver for Windows 98
(2364w9
x). For example, type in:
D:\2364w9x
Then
click
Nex
t.
5. The
Add New Hardware Wizard
will appear and indicate the
GARNET SYSTEMS CO.LTD.
ADSL PCI NIC-GAN-1021
.
Click
Nex
t.
6. When the
Service Option
window appears, click
Advance
d.