background image

RFC2364 

– Point-to-Point Protocol over ATM 

User Name  

Password  

Logon Domain  

VPI value 

VCI value 

VPI = ____ (Default VPI=0) 

VCI = ____ (Default VCI=35) 

ADSL Mode Type 

ANSI T1.413 Issue 2 

ITU G.992.2 Annex A (G.lite) 

ITU G.992.1 Annex A (G.dmt).

 

 

Step 2 

– Install the ADSL modem card 

HARDWARE INSTALLATION 

WARNING! 

To avoid possible damage to your GAN-1021 card you need to use an anti-static 

grounding device or hold onto the metal chassis  of the PC to provide anti-static grounding. 

1. Shut down the system and switch the power 

of

f. 

2. Unplug the AC power cable from the PC. 

3. Remove the cover from the PC chassis. 

4. Unscrew the “slot cover bracket” from an unused PCI slot. 

5. Insert the card into an empty PCI slot. 

6. Firmly press the GAN-1021 card into the slot and secure the card to the chassis with the chassis  

bracket screw. 

7. Connect one end of a phone cable to the RJ -11 port on the GAN-1021 card and plug the other end 

of the cable into the ADSL data service. 

8. Replace the cover of the PC chassis. 

Before you plug the power cable back into the PC system and turn the power on, go 

to Step 3 and determine the section/page you need to be on to install the drivers. 

 

 

 

Содержание GAN-1021


















Отзывы: