1. In the
Select Protocol & Rate
section you shall find the ADSL Mode selection options.
Select the ADSL mode(s) you require, by clicking in the selection box(s).
"
ITU G.992.1 (G.dmt) ………....referred to as
G.dmt
"
ITU G.992.2 (G.lite)………......referred to as
G.lite
"
ANSI T1.413 ……….................referred to as
ANSI
2. After you select and check the mode(s) you require, click
Set Protocol & Rat
e. Your new
ADSL Mode settings are now in effect.
3. Verify that the
PVC
and
Rate
settings are correct and the click
Clos
e.
!
SELECT RATE
NOTE:
The default downstream rate of 1.5Mbps is recommended, as the majority of service
providers today supply 1.5Mbps. This allows for video streaming of about 1Mbps resulting in A
CPU utilization of under 30% @ 300 MHz. However, for higher speed ADSL service and /or
CPU’s, the rate can be increased. The rates can be easily be changed as follows:
1. To change the rate settings enter in the
Downstream Rate
and
Upstream Rate
required, then
click the
Set Protocol & Rate
button.
2. Verify that the
Protocol/Mode
and
PVC
settings are correct and the click
Clos
e..
APPENDIX F - SYSTEM REQUIREMENTS
Power Requirements
0.75A Max @ +5V
±
5%, 0.1A max @
±
12V,
±
5%
Environmental Requirements
Operating Temperature: 0
°
C to 7
0
C with airflow
Non-operating Temperature: -10
°
C to 85
°
C
Operating Humidity: 10% to 90% non-condensing
Non-operating storage humidity: 5% to 95% non-condensing