15. The
Internet Protocol (TCP/IP)
window appears. Under the
General
tab, enable
Use the
following IP addres
s. The default settings for IP configurations will turn from gray to clear.
Enter the
IP addres
s,
Subnet Mas
k, and the
Default Gateway
supplied by your ADSL
service provider. Click
OK.
16. The previous
General Tab
window appears. Click
OK.
GAN-1021 Installation Guide
17. The
Network and Dial-up Connection
window appear
s. Close
this window and your
connection is complete.
APPENDIX A - EDITING RFC 2364 INTERNET SERVICE CONNECTION W98, 2000
1. To view or edit the ADSL connection service address, right-click the
Diagnostic Tool
icon
(located on the Taskbar), and select the
Configuration
option.
2. The
PVC Setup
(Permanent Virtual Connection) window displays the connection service
address. Click
Close
to exit window.
3. To edit the
connection service addres
s, select and enter the VPI and VCI address in the field
shown and click
PVC Settin
g.
4. To accept a
Connection Address
that has been changed
(Restart
the PC system) click
Ye
s.
APPENDIX B - EDITING RFC 1483 INTERNET SERVICE CONNECTION W98
NOTE:
This section includes the IP configuration specifics for Windows 98, 98SE. Windows
98 is slightly different from that of Windows 98SE. Other than minor screen differences, the
process for editing the IP address settings is the GAN-1021e for Windows 98 and Windows 98SE.
1. At the desktop, double click
My Compute
r, then double click
Control Panel
to view the
contents of the control panel. In the
Control Panel
window, double click the
Network
icon.
NOT
E: The Network window shortcut is a right-click the
Network Neighborhood
on your
desktop then left -click
Propertie
s.
2. Select the
Protocols
tab of the network window. Select
TCP/IP
Protocol and click
Propertie
s.
3. Select the
IP address
option and note that the IP Address and Subnet Mask regions will turn
from gray to active.
4. Enter the IP Address (e.g. 192.168.4.39) and subnet mask (e.g. 255.255.255.0).
5. The Default Gateway is also entered in this window.
NOT
E: Please refer to your ADSL service provider and enter (or edit) the following fields:
6. Enter the
Host Name
(e.g. GAN-1021) and
Domain
(e.g. pacbell.net).