Garmin West Marine 276C Plus Скачать руководство пользователя страница 116

Страница: 116 / 140

Optional Accessories

In addition to the standard accessories included with your 276C

Plus, several optional accessories are available to enhance the

operation of the 276C Plus.
To obtain replacement parts and optional accessories, contact

your Garmin Dealer, Garmin Product Support in the U.S.A. at

800/800.1020, or Garmin Europe at

44/0870.8501241.

WARNING:

Garmin accessories have been designed and

speciﬁcally tested for use with Garmin products. Accessories

offered by other manufacturers have not been tested or approved

for use with Garmin products. Use of such accessories could

cause damage to the 276C Plus and void the warranty.

Auto Navigation Kit

: Provides the parts and map data to use the

276C Plus in an automobile.

GA 29

GA 29F

, and

GA 26C Antennas

: Garmin remote antennas.

Non-Skid Friction Mount

: Portable vehicle mount, no installation

required.

Permanent and Temporary Adhesive Disks

: Adhesive disks for

using the unit in a vehicle.

External Speaker with 12/24-Volt Adapter Cable

: Allows the unit

to operate from the vehicle’s power system through the cigarette

lighter adapter. Provides a speaker for vocal prompts.

PC Interface Cable

: Connects the unit to a serial port on your PC.

Power/Data Cable

: Allows you to connect the unit to the electrical

system using bare wires.

Programmable Data Cards

: Blank data cards available in 8 MB,

16 MB, 32 MB, 64 MB, 128 MB, and 256 MB sizes. Download

detailed map data from MapSource CD-ROMs to a data card, either

directly through your 276C Plus using the PC USB Cable, the

optional PC Interface Cable, or with the optional USB Data Card

Programmer.

USB Data Card Programmer

: Programs blank data cards at high

speed through a PC.

Carrying Case

: Protects the 276C Plus when not in use; has storage

space for data cards.

Protective Cover

: Snaps on the front of the unit to protect the

screen from damage.

MapSource Software CD-ROMs

: Offers several detailed mapping

options that are compatible with the 276C Plus, including City

Select, BlueChart, Fishing Hot Spots, and Topo.

Pre-Programmed Data Cards

: Data cards pre-programmed with

either Garmin BlueChart or Fishing Hot Spots map data.

108

276C Plus Owner’s Manual

PPENDIX

PTIONAL

CCESSORIES

190-00501-00_0A.indd 108

1/13/2005 10:44:06 AM

Содержание West Marine 276C Plus













































































































































Результаты поиска

Содержание West Marine 276C Plus

Отзывы:

Похожие инструкции для West Marine 276C Plus

Бренды по названию

Популярные бренды

Garmin West Marine 276C Plus, Руководство пользователя

Результаты поиска

Содержание West Marine 276C Plus

Отзывы:

Похожие инструкции для West Marine 276C Plus

Бренды по названию

Популярные бренды