Audio Settings
Select >
> >
.
NOTE: when an option button is filled, the option is on. When the option button is clear, the option is off.
Zone: enables you to configure the speaker zones (
Speaker Zone Settings, page 50
).
Tuner Region: sets the region used by the various radio sources.
Device Name: sets a name for this stereo.
Searching: enables Fusion Alpha Search Technology (FAST), which allows you to quickly search for tracks by
letter or number. You can set the minimum number of tracks required to enable the FAST menu. FAST
searching is available when your device contains more than this minimum number of tracks.
AirPlay Password: sets a password that a user must enter when connecting to the stereo using the AirPlay
feature.
Source: sets options for audio sources available on the stereo dock. You can enable or disable sources, rename
sources or set which sources the device can stream over the Fusion PartyBus network (
).
Network: enables you to configure the network settings (
Network Configuration, page 51
).
Display: sets the Music app to display day or night colours. You can select Auto to allow the device to
automatically set day or night colours based on the time of day.
About: shows the software version information for the stereo.
Speaker Zone Settings
Setting a Zone Name
You can set a name for a speaker zone to make it easier to identify.
1 Select >
> >
> Zone.
2 Select a zone.
3 Select Zone Name.
4 Use the on-screen keyboard to enter a name, and select
.
Linking Zones
You can link zones 1 and 2 to keep the volume levels synchronised. Adjusting the volume of either of the linked
zones affects both zones.
Select >
> >
> Zone > Zone 2 > Link to Zone 1.
When zones 1 and 2 are linked, appears on zones 1 and 2 on the volume screen.
NOTE: after zones 1 and 2 are linked, you cannot adjust the volume of each zone individually.
Enabling Volume Control of Zone 3 or 4 from a Connected Amplifier
By default the volume of zones 3 and 4 are controlled by the stereo. You can control the volume of these zones
using the connected amplifier instead.
1 Select >
> >
> Zone.
2 Select zone 3 or zone 4.
3 Select Volume Control to clear the check box.
The audio signal from the zone is provided to the amplifier as a fixed-line-level output.
Disabling a Zone
You can disable an unused zone and remove it from the audio level pages. When a zone is disabled, you cannot
change any of the settings for that zone. You can disable zones 2, 3 and 4 only.
1 Select >
> >
> Zone.
2 Select a zone.
3 Select Zone Enabled to clear the tick box.
50
Music Playback and Stereo Features
Содержание VIEO RV 1050 Series
Страница 1: ...VIEO RV850 RV1050SERIES Owner smanual ...
Страница 8: ......
Страница 81: ......
Страница 82: ...support garmin com GUID F2A144DD 76F7 44EF AADF 270AAAC241A9 v3 December 2021 ...