Garmin Vector 2S, Быстрый старт

Страница: 6 / 72

6
E
N
NOTE: Stay 10 m away from other
ANT+ sensors while pairing.
2 Turn on the Edge device.
3 From the home screen, select >
Sensors > Add Sensor > Power .
4 Rotate the crank arm a few times.
5 Select your sensor.
When the sensor is paired with your
Edge device, a message appears, and
the sensor status is Connected. You can
customize a data field to display Vector
data.
Pedal Pod Status LED
Multiple green LED flashes indicate a
system issue that requires your attention.
NOTE: When the pedal pod battery is
low, the status LED flashes red, instead
of green.
LED Activity Status
1 green flash
every 10 seconds.
The Vector system is
working properly.
2 flashes every 10
seconds.
The pedal is not
connected.
3 flashes every 10
seconds.
The pedal pod is
connected, but it
cannot communicate
with the Edge device.