Garmin Vector 2S, Быстрый старт

Страница: 7 / 72

7
E
N
4 flashes every 10
seconds.
The pedal pod is
searching for the
other pedal pod.
NOTE: For
information about
upgrading the Vector
S, see the owner’s
manual.
5 flashes every 10
seconds.
The installation angle
is not set or cannot
be detected.
6 flashes every 10
seconds.
There is a hardware
installation error.
7 flashes every 10
seconds.
There is a software
update in progress.
1 red flash every
10 seconds.
The pedal pod battery
is low.
Your First Ride
Before you ride with Vector for the first
time, you must enter the crank length and
set the installation angle of the sensors
inside the pedals. The Vector system
automatically calibrates after each ride.
You must also enter the crank length
when you move Vector to another bike.
This procedure contains instructions
for the Edge 1000 device. If you have
another compatible device, see your
owner’s manual or go to www.garmin.
com/vectorowner.