nüvi 800 Series Owner’s Manual
Appendix
battery and then fully charge it. Do not
unplug the nüvi until it is totally charged.
You can also use the Suspend/Resume
mode to put your nüvi in “sleep” mode
and to quickly wake it up. With your
nüvi powered on, slide the
Power
key
to the left. Operation is suspended.
Slide the
Power
key to the left again to
resume operation.
To completely turn off your nüvi,
remove the battery.
Replacing the Battery in the
nüvi
If you need to replace the battery in the
nüvi, use a Garmin lithium-ion battery
010-10987-03. Purchase a replacement
your local waste disposal department for
information about properly disposing of
the battery.
Replacing the Battery in the
Remote Control
The remote control contains a user-
replaceable CR2032 battery.
1. Use a coin to twist the cover
counterclockwise until open.
2. Insert the
round
lithium coin
CR2032
battery into
the remote
control with
the positive
side facing
up.
3. Align the arrow on the battery cover
with the arrow on the outer edge of
the remote.
4. Use a coin to twist the cover
clockwise until closed.
nOTe:
Contact your local waste
disposal department to properly
dispose of batteries.
Arrow on
battery cover
Battery
cover
Arrow on
outer edge
of remote
Battery
Arrow on
battery cover
Battery
cover
Arrow on
outer edge
of remote
Battery