Garmin NavTalk Скачать руководство пользователя страница 14

Страница: 14 / 130

Getting Started

Section 2

Turning the Unit On/Off

Turning the Unit On and Off

1. Press and hold the

POWER

key for more than two seconds.

A Welcome page will display and if no PIN security is active, then move

to the Main Menu when GPS is Off. If there is no SIM card installed

an “Insert SIM” message will display. Turn Off the unit and install the

SIM card as explained previously. A “SIM Not Ready” message may

also appear if you try to dial immediately after turning the unit On.

2. An “Enter PIN 1 Code” message will display if the SIM card security
is activated. Use the

KEYPAD

keys to enter your PIN1 code. As you

enter each character of your PIN 1 code, an * will display for number
of the code, then press the

ENTER

key. A “Code Accepted” message

will appear. Press

ENTER

to acknowlwdge and, if the GPS receiver

is enabled, a warning message will appear. Press the

ENTER

key to

   acknowledge and display the Main Menu. Your service provider will
  advise you of the preset PIN 1 code (i.e. 1234). It is recommended that
  you change this code when setting up your unit. Record your new PIN
  code and store in a safe place.

3. If you make a mistake, press the

CLEAR

key and begin again. If you fail

to enter your PIN 1 code in three attempts the unit will lock and a “SIM

Blocked” message will appear. To learn how the PIN Code Security

feature is set up and how to use an unblock code (PUK), see the section

of Phone Operation, entitled “Security Settings” on page 56.

Adjusting the Screen Contrast and Backlight Settings

1. Press and release the

POWER

key with power On to display the Screen

Contrast/Backlight Settings panel.

2. Use the Right and Left

ARROW

keys to move the contrast lever until

the desired contrast level is achieved.

3. Use the Up and Down

ARROW

keys to select the Backlight buttons

Refer to the following page for more Backlight details.

Unit Power Key

Contrast
Adjustment
Lever

Press and Release to turn On

Press and Hold to turn Off

Contrast/Backlight Settings Screen

SIM PIN 1 Code Entry

SIM Code Entry Successful

SIM Code Entry Error - Re-enter correct code

SIM Blocked Message after three unsuccessful attempts.

Backlight
Settings
Buttons

NvTlkGSMManual copy.indd 4

12/2/2002, 8:41:50 AM

Содержание NavTalk



































































































































Результаты поиска

Содержание NavTalk

Отзывы:

Похожие инструкции для NavTalk

Бренды по названию

Популярные бренды

Garmin NavTalk, Руководство пользователя

Результаты поиска

Содержание NavTalk

Отзывы:

Похожие инструкции для NavTalk

Бренды по названию

Популярные бренды