EN–2
Installing the GSC 10
WARNING
See the
Important Safety and
Product Information
guide in
the Forerunner
®
or the Edge
®
product box for product
warnings and other important
information.
Both magnets must be
aligned with their respective
indication lines.
1. Place the GSC 10 on the
rear chain stay (on the
side opposite the drive
train).
NOTE
: Place the flat
rubber pad
➊
or the
triangle-shaped rubber
pad between the GSC 10
and the chain stay for
stability.
➓
➋
➊
➏
2. Loosely attach the
GSC 10 using two cable
ties
➋
.
3. Attach the pedal magnet
➌
to the crank arm using
the adhesive mount and a
cable tie
➍
.
The pedal magnet must
be within 5 mm of the
GSC 10. The indication
line
➎
on the pedal
magnet must line up with
the indication line
➏
on
the GSC 10.
➍
➌
➎
4. Unscrew the spoke
magnet
➐
from the
plastic piece.
➒
➐
➑
5. Place the spoke in the
groove of the plastic
piece, and tighten it
slightly.
190-00646-00_0H.indd 2
7/2/2012 7:51:31 AM
