background image

GPSMAP 700 Series Owner’s Manual 

35

Where To? 

4.  Complete an action:

•  Select 

Forward

 to navigate the route from the starting point used when the route was created.

•  Select 

Backward

 to navigate the route from the destination point used when the route was created.

A magenta line appears. In the center of the magenta line is a thinner purple line that represents the 

corrected course from your present location to the destination. The corrected course is dynamic, and it 

moves with your boat when you are off course.

5.  Review the course indicated by the magenta line.
6.  Follow the magenta line along each leg in the route, steering to avoid land, shallow water, and other 

obstacles.

NoTe

: If you are off course, follow the purple line (corrected course) to go to your destination, or steer 

back to the magenta line (direct course).

Browsing for, and Navigating Parallel to, a Saved Route

Before you can browse a list of routes and navigate to one of them, you must create and save at least one route 

(

page 29

).

1.  From the Home screen, select 

Where To?

 > 

Routes

.

2.  Select a route.
3.  Select 

Navigate To

.

4.  Select 

offset

 to navigate parallel to the route, offset from it by a specific distance.

5.  Indicate how to navigate the route:

•  Select 

Forward - Port

 to navigate the route from the starting point used when the route was created, to 

the left of the original route.

•  Select 

Forward - Starboard

 to navigate the route from the starting point used when the route was 

created, to the right of the original route.

•  Select 

Backward - Port

 to navigate the route from the destination point used when the route was 

created, to the left of the original route.

•  Select 

Backward - Starboard

 to navigate the route from the destination point used when the route was 

created, to the right of the original route.

6.  Enter the offset distance.
7.  Select 

Done

.

A magenta line appears. In the center of the magenta line is a thinner purple line that represents the 

corrected course from your present location to the destination. The corrected course is dynamic, and it 

moves with your boat when you are off course.

8.  Review the course indicated by the magenta line.
9.  Follow the magenta line along each leg in the route, steering to avoid land, shallow water, and other 

obstacles.

NoTe

: If you are off course, follow the purple line (corrected course) to go to your destination, or steer 

back to the magenta line (direct course).

Browsing for, and Navigating, a Recorded Track

Before you can browse a list of tracks and navigate to them, you must record and save at least one track 

(

page 31

).

1.  From the Home screen, select 

Where To?

 > 

Tracks

.

2.  Select a track.
3.  Select 

Follow Track

.

4.  Complete an action:

•  Select

 Forward

 to navigate the track from the starting point used when the track was created.

•  Select 

Backward

 to navigate the track from the destination point used when the track was created.

5.  Review the course indicated by the colored line.
6.  Follow the colored line, steering to avoid land, shallow water, and other obstacles.

Содержание GPSMAP 740





































































































Отзывы: