Turning On the GPSMAP 378/478
Before you turn on the GPSMAP 378/478, be sure the antenna is up
as shown on page 1, and it has a clear and unobstructed view of the
sky to receive satellite signals.
The first time you turn on your GPSMAP 378/478, the GPS receiver
must collect satellite data and establish its current location. To
ensure proper initialization, the GPSMAP 378/478 is shipped from
the factory in AutoLocate Mode, which allows the receiver to “
find
itself” anywhere in the world.
To turn the GPSMAP 378/478 on and off:
1. Press and hold the
POWER
key. When the unit turns on, a
tone sounds and the Warning Page opens.
Warning Page
2. Read the warning, and then press
ENTER
to continue.
3. To turn off the GPSMAP 378/478, press and hold the
POWER
key again.
Adjusting the Backlight and Volume
You can adjust the backlight to see the screen better. If you are
using the external speaker with 12/24-Volt adapter cable with
the GPSMAP 378/478 or you have headphones plugged into the
headphone jack, you can adjust the volume level of the audio output.
To adjust the backlight level or volume:
1. Press and quickly release the
POWER
key.
2. Press up on the
ROCKER
to increase the brightness or
press down to decrease. Press right to raise the volume or
left to lower.
3. Press
ENTER
or
QUIT
to close the Backlight/Volume
adjustment window.
Backlight
adjustment slder
Volume
adjustment slder
Battery time remaining and power source indicator
GPSMAP 378/478 Owner’s Manual
3
g
ettIng
s
tArted
>
t
urnIng
o
n
the
gPsMAP 378/478
Содержание GPSMAP 190-00683-00
Страница 1: ...Owner s Manual chartplotting receiver GPSMAP 378 478 GPSMAP 478 shown...
Страница 151: ......