manualshive.com logo in svg

Garmin GPS 500, Руководство и справочник пилота

Поделиться
Скачать
Garmin GPS 500 Скачать руководство пользователя страница 24

GPS 500 Pilot’s Guide and Reference

1-16

SECTION 1 

INTRODUCTION

190-00181-60  Rev. G

The 

Nearest Airport Page may be used in conjunction 

with the 

Direct-to

 Key to quickly set a course to a nearby 

facility  in  an  in-flight  emergency.    Selecting  a  nearby 
airport as a direct-to destination overrides the flight plan 

or cancels a previously selected direct-to destination.  (The 

pilot  still  has  the  option  of  returning  to  the  flight  plan 

by  cancelling  the  direct-to;  see  Section  3.1,  Cancelling 
Direct-to Navigation.)

Selecting a nearby airport as a direct-to 
destination from the Nearest Airport Page:

1)  From the Nearest Airport Page, press the small 

right

 knob to activate the cursor.

2)  Turn the large 

right

 knob to select the desired 

airport from the list.

3)  Press the 

Direct-to

 Key.

4)  Press the 

ENT

 Key.

5)  Press the 

ENT

 Key (again) to navigate to the 

nearby airport.

Selecting a nearby airport as a direct-to 
destination from an Airport Information 
Page:

1)  Press the 

Direct-to 

Key.

2)  Press the 

ENT

 Key (Figure 1-26).

Figure 1-26  Direct-To Waypoint Page

3)  Press the 

ENT

 Key again to navigate to the 

nearby airport.

Nearest (NRST) Airspace Page

The last page in the NRST group, the Nearest Airspace 

Page (Figure 1-27), provides information for up to nine 

controlled  or  special-use  airspaces  near  or  in  the  flight 
path.  

Airspace information appears on this page based on 

the same criteria used for airspace alert messages:

•  If the projected course will take the aircraft inside 

an airspace within the next ten minutes, the 
message ‘Airspace ahead -- less than 10 minutes’ 

appears.

•  If the aircraft is within 2 nm of an airspace and the 

current course will take it inside of the airspace, 

the message ‘Airspace near and ahead’ appears.

•  If the aircraft is within 2 nm of an airspace and 

the current course will not take it inside of the air-

space, the message ‘Near airspace less than 2nm’ 

appears.

•  If the aircraft has entered an airspace, the message 

‘Inside airspace’ appears.

Figure 1-27  Nearest Airspace Page 

Содержание GPS 500

































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды