Garmin GPS 500 Скачать руководство пользователя страница 155

Страница: 155 / 256

GPS 500 Pilot’s Guide and Reference

8-21

SECTION 8

AUX PAGES

• ‘Nearest Airport Criteria’ - Defines the minimum

runway length and surface type used when
determining the nine nearest airports to display
on the

Nearest Airport Page. A minimum runway

length and/or surface type may be entered to
prevent airports with small runways, or runways
that are not of appropriate surface, from being

displayed. The default settings are ‘0 feet (or
meters)’ for runway length and ‘any’ for runway

surface type.

• ‘Data Field Configuration’ - Allows the pilot to

select what type of data is displayed in the data
fields along the left-hand side of the display.

Available data options are a configurable data
field (to display information such as ground
speed, track, or distance to destination), or if the

GPS 500 is interfaced with a traffic information

device (see Section 12), thumbnail traffic can be

configured for display in the data field.

Setup Page: CDI/Alarms

Setting the airspace warning messages or
changing the altitude buffer:

1) Select ‘CDI/Alarms’ from the Setup Page, using

the steps described at the beginning of this
section.

2) Turn the large

right

knob to highlight the

‘On’/’Off’ field next to the desired airspace
type. ‘MOAs & Other Airspace’ includes military
operation, alert, caution, danger, training, and
warning areas.

3) Turn the small

right

knob to select ‘On’ or

‘Off’, as desired (Figure 8-31). Press the

ENT

Key to accept the selection.

Figure 8-31 Class B Alarm Window

190-00181-60 Rev. G

Содержание GPS 500

































































































































































































































































Результаты поиска

Содержание GPS 500

Отзывы:

Бренды по названию

Популярные бренды

Garmin GPS 500, Руководство и справочник пилота

Результаты поиска

Содержание GPS 500

Отзывы:

Бренды по названию

Популярные бренды