manualshive.com logo in svg

Garmin GPS 500, Руководство и справочник пилота

Garmin GPS 500 - надежный навигатор с широкими возможностями. Скачайте бесплатное руководство пользователя с нашего сайта для удобного пользования устройством. Необходимая информация доступна на manualshive.com. Не теряйте времени и начните использовать GPS 500 уже сегодня!

Поделиться
Скачать
background image

GPS 500 Pilot’s Guide and Reference

8-20

SECTION 8 

AUX PAGES

CDI Scale/Flight Phase:

RAIM Protection:

Auto (oceanic)

4.0 nm

±

5.0 nm or Auto (enroute)

2.0 nm

±

1.0 nm or Auto (terminal)

1.0 nm

±

0.3 nm or Auto (approach)

0.3 nm

Table 8-2  CDI Scales

  An arrival alarm, provided on the CDI/Alarms 

Page, may be set to notify the pilot with a message 
when the aircraft has reached a user-defined 

distance to the final destination (the direct-to 
waypoint or the last waypoint in a flight plan).  
Once the aircraft has reached the set distance (up 
to 99.9 units), an ‘Arrival at [waypoint]’ message 

is displayed.

  The Airspace Alarms fields allow the pilot to 

turn the controlled/special-use airspace message 
alerts on or off.  This does not affect the alerts 

listed on the Nearest Airspace Page or the 

airspace boundaries depicted on the 

Map Page.  It 

simply turns on/off the warning provided when 
approaching or near an airspace.

  An altitude buffer is also provided which ‘expands’ 

the vertical range above or below an airspace.  

For example, if the buffer is set at 500 feet, and 

the aircraft is more than 500 feet above or below 
an airspace, the pilot is not notified with an alert 
message; if the aircraft is less than 500 feet above 
or below an airspace and projected to enter it, the 
pilot is notified with an alert message.  The default 
is 200 feet.

•  ‘Units/Position’ - Allows the pilot to configure 

the displayed data to standard or metric units of 
measure.  This setting applies to distance, speed, 

altitude, fuel, pressure, and temperature.  Also 

provides three 

magnetic variation (heading) 

options: True, Auto, or User-defined.  If ‘Auto’ is 

selected, all track, course and heading information 
is corrected to the magnetic variation computed 

by the GPS receiver.  The ‘True’ setting references 
all information to true north, and the ‘User’ setting 

corrects information to an user-entered value.

  Configuration settings for position format are 

also provided, and the map datum setting is 
shown.  The map datum used in the GPS 500 

is WGS 84.  Note that a map datum that does 

not match the charts can result in significant 

differences in position information.  When using 

the paper charts for reference only, the GPS 500 
still provides correct navigation guidance to the 
waypoints contained in the database, regardless of 
the datum differences.

•  ‘Date/Time’ - Provides settings for time format 

(local or UTC; 10- or 24-hour) and time offset. 

The time offset is used to define current local 

time. UTC (also called GMT or Zulu) 

date 

and time are calculated directly from the GPS  
satellites’ signals and cannot be changed.  To use 
local time, simply designate the offset by adding 
or subtracting the correct number of hours.

•  ‘Display Backlight’ - Allows the pilot to adjust the 

display for optimum viewing in any condition.  

Automatic 

backlighting is available which uses 

a built-in photocell (at the top left corner of 
the display bezel) to make the proper display 

adjustments without any user intervention.  The 
pilot may also select manual control of the display 
contrast and backlighting of the GPS 500’s display.

190-00181-60  Rev. G

Содержание GPS 500

































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для GPS 500

Thales FMGS Pilot'S Manual preview
FMGS
Бренд: Thales Страницы: 703
Philips Signage Solutions BDL4678XL User Manual preview
Signage Solutions BDL4678XL
Бренд: Philips Страницы: 41
HAMOKI HA-900Z Operation Instructions Manual preview
HA-900Z
Бренд: HAMOKI Страницы: 10
Lynx Micro System Instructions Manual preview
Micro System
Бренд: Lynx Страницы: 11
Lynx 9029000-20000 Pilot'S Manual preview
9029000-20000
Бренд: Lynx Страницы: 96
Lynx NGT-9000 Series Installation Manual preview
NGT-9000 Series
Бренд: Lynx Страницы: 182

Бренды по названию

Популярные бренды

Загрузить еще бренды