Garmin GPS 400W, Руководство по установке

Страница: 84 / 212

Page 5-6 GNS 400W Series Installation Manual
Rev. G 190-00356-08
5.3.2 MAIN RS-232 CONFIG Page
Select the MAIN RS-232 CONFIG Page (see Figure 5-2).
Change the selectable RS-232 inputs and/or outputs to
match that of the equipment installed in the aircraft.
CHANNEL INPUTS
Selection Description
Off
No unit(s) connected to input of this channel.
Arnav/ei-fuel Serial fuel flow information from the following units:
ARNAV FC-10, FT-10
Electronics International FP-5L
Crossfill
Serial transfer of flight plans and user waypoints between two 400W/500W
Series units
GDL 69
Serial data input for in-flight access to weather and messaging from the
following units:
Garmin GDL 69/69A
GDL 88 [1]
Serial communication to a Garmin GDL 88.
GDL 88 WX [1] Serial communication to a Garmin GDL 88 plus display of FIS-B weather
information.
GTN Crossfill [1] Serial transfer of the active flight plan from a Garmin GTN unit to a GNS unit,
and a manual transfer to user waypoints between GNS and GTN units.
Icarus-alt Serial altitude data from the following units:
Icarus Instruments 3000
Sandia SAE5-35
Garmin GTX 327 Transponder
Trans-Cal Industries IA-RS232-X, SSD120
ACK Technologies A-30 (Mod 8 and above)
Ryan TCAD Traffic information from a Ryan TCAD 9900B or 9900BX Series system.
Shadin-adc
Serial air data information from the following units:
Shadin ADC 200, 200+, 2000
Shadin-alt Serial altitude data from the following units:
Shadin 8800T, 9000T, 9200T
Shadin-fadc Serial air data and fuel flow information from the following units:
Shadin 9628XX-X Fuel/Air Data Computer
INSIGHT TAS 1000 Air Data Computer
Shadin-fuel
Serial fuel flow information from the following units:
Shadin 91053XM Digital Fuel Management System
Shadin 91204XM Digital Fuel Management System
JP Instruments EDM-700 or EDM-760 Engine Monitor
WX-500 Lightning strike information from an L3 Communications WX-500
Stormscope.
[1] Main software version 5.00 or later.
Figure 5-2. MAIN RS-232 CONFIG Page