Garmin GNS 530 Скачать руководство пользователя страница 61

Страница: 61 / 288

GNS 530(A) Pilot’s Guide and Reference

190-00181-00 Rev. H

4-1

SECTION 4

DIRECT-TO NAVIGATION

SECTION 4: DIRECT-TO

NAVIGATION

4.1 OVERVIEW

The GNS 530’s direct-to function provides a quick

method of setting a course to a destination waypoint.

Once a direct-to is activated, the GNS 530 establishes a
point-to-point course line (great circle) from the present

position to the selected direct-to destination. Navigation

data on the various NAV pages provides steering guidance

until the direct-to is cancelled or replaced by a new
destination.

Selecting a direct-to destination:

1) Press the

Direct-to

Key. The Select Direct-to

Waypoint Page appears (Figure 4-1), with the
waypoint identifier field highlighted.

Figure 4-1 Select Direct-to Waypoint Page

2) Use the small and large

right

knobs to

enter the identifier of the desired destination
waypoint (Figure 4-2).

Figure 4-2 Waypoint Identifier Field Selected

3) Press the

ENT

Key to confirm the selected

waypoint, and press the

ENT

Key again to

activate the direct-to function (Figure 4-3).

Figure 4-3 ‘Activate?’ Field Highlighted

When off course while navigating to a waypoint, the

direct-to function may also be used to re-center the CDI
(HSI) needle and proceed to the same waypoint.

Re-centering the CDI (HSI) needle to the
same destination waypoint:

Press the

Direct-to

Key, followed by the

ENT

Key twice.

NOTE:  When navigating an approach with the
missed  approach  point  (MAP)  as  the  current
destination,  re-centering  the  CDI  (HSI)  needle
with the

Direct-to

Key cancels the approach.

Содержание GNS 530

































































































































































































































































































Результаты поиска

Содержание GNS 530

Отзывы:

Бренды по названию

Популярные бренды

Garmin GNS 530, Руководство и справочник пилота

Результаты поиска

Содержание GNS 530

Отзывы:

Бренды по названию

Популярные бренды