Garmin GNS 530 Скачать руководство пользователя

Страница: 238 / 288

GNS 530(A) Pilot’s Guide and Reference

190-00181-00 Rev. H

14-22

SECTION 14

ADDITIONAL FEATURES

Requesting NEXRAD Data

NEXRAD data can be requested from the Data Link

Page or the Map Page.

Requesting NEXRAD data from the Data
Link Page:

1) Select the Data Link Page from the AUX Page

Group.

2) Press the small

right

knob to activate the

cursor. ‘NexRad Request’ is highlighted (Figure
14-30).

Figure 14-30 Data Link Page (GDL 49)

3) Press the

ENT

Key.

The NEXRAD Request Page

(see Figure 14-31) is displayed.

Figure 14-31 NEXRAD Request Page (GDL 49)

The

NEXRAD Request Page has the following user-

selectable fields:

•

Center - This field allows the pilot to specify

reference points for the request. The following

five options are available for the ‘Center’ field:

♦

Current Position - Request NEXRAD data from

the aircraft’s current position.

♦

Look Ahead - Request NEXRAD data ahead of

(along) the current route.

♦

From ID - Request NEXRAD data from a

specific waypoint identifier. If ‘From ID’ is

selected as the reference point for the request,

the ‘WPT’ field is displayed (in place of

‘Position’). The ‘WPT’ field is used to enter a

waypoint identifier as the reference point for
the request.

♦

From Lat/Lon - Request NEXRAD data from

a specific latitude and longitude. This is only
selectable when requesting from the map. The

‘Position’ field displays the position of the map

cursor and cannot be edited.

♦

From Flight Plan - Request NEXRAD data from

one of the waypoints in the active flight plan.
This is only selectable when an active Flight

Plan has been selected. The ‘Flight Plan’ field

(displayed in place of ‘Position’) is used to select

which waypoint in the active flight plan to use
as the reference point for the request.

•

Radius - This field selects a request radius from 50

to 250 nautical miles from the selected position.

•

Position (also WPT or Flight Plan) - ‘Current

Posn’-Position is current, ‘Look Ahead’-Position is
look ahead position. ‘From ID’-Position is from
the ID entered into the WPT field. ‘Flight Plan’ is
the ID selected from the active flight plan.

Содержание GNS 530

































































































































































































































































































Результаты поиска

Содержание GNS 530

Отзывы:

Похожие инструкции для GNS 530

Бренды по названию

Популярные бренды

Garmin GNS 530, Руководство и справочник пилота

Результаты поиска

Содержание GNS 530

Отзывы:

Похожие инструкции для GNS 530

Бренды по названию

Популярные бренды