manualshive.com logo in svg

Garmin GNS 480, Руководство по установке

Поделиться
Скачать
Garmin GNS 480 Скачать руководство пользователя страница 116

Post-Installation Configuration & Checkout 

3-42 

560-0982-01 Rev A 

GNS 480 (CNX80) Installation Manual 

3.3.3.5  Autopilot Flight Test Check 

1.

 

Enter and activate a flight plan on the GNS 480.  Engage the autopilot in the GPSS mode.  Verify 
that the autopilot flies the course. 

2.

 

Disengage the autopilot and fly off course.  Re-engage the autopilot (in GPSS mode) and verify that 
it correctly intercepts the course and continues to fly it. 

3.

 

Turn off the autopilot GPSS but leave the autopilot engaged in Nav mode.  Verify that it maintains 
the current course. 

3.4 D

ATABASE 

C

HECK

 

Check the database to ensure it is current. The database information is displayed at startup.  To check the 
database:  
1.

 

Turn off the GNS 480 and then turn it on.  The GNS 480 will go through its normal start-up 
sequence.  

2.

 

Wait for the database page to be displayed.  

3.

 

Verify that the database is not expired (the expiration date will be displayed in green text if the 
database is current, and yellow text if it has expired).  

 
If the database card has to be reprogrammed with a new revision, remove and replace the database card 
as described in the following section.  

3.4.1 D

ATA 

C

ARD 

R

EPLACEMENT

 

 

CAUTION 

Handle the data card carefully. Do not touch the connector edge of the data card.

 

Do not insert or remove the data card within 10 seconds after the GNS 480 is 
turned on. 

 

To replace the data card do the following:  
1.

 

Ensure that the GNS 480 is turned off.  

2.

 

Press the data card ejector to eject the card and remove the data card. Gently pull the card straight out 
of the slot.  

3.

 

With the label facing left, insert the new data card by pushing the card straight into the slot and press 
firmly into place. When fully inserted, the ejector button will be flush with the top of the data card.  

Содержание GNS 480



























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды