Garmin G300 Pilot’s Guide
190-00921-00 Rev. E
211
Integrated Autopilot
System
Overview
Flight
Instruments
EIS
COM
Interface
GPS
Navigation
Flight
Planning
Hazar
d
Avoidance
Additional
Featur
es
Integr
ated
Autopilot
Annun/Alerts
Appendix
Index
HEADING MODE (HDG)
Heading Mode is activated by pressing the
AP HDG
Softkey. Heading
Mode acquires and maintains the Selected Heading. The Selected Heading
is shown by a light blue bug on the HSI and Heading Tape and in the box
to the upper left of the HSI.
Heading Mode Annunciation
CHANGING THE SELECTED HEADING
NOTE:
Press and hold the
FMS
Joystick (on the PFD or PFD Page) to
synchronize the Selected Heading to the current heading.
Changing the selected heading (integrated autopilot config-
ured):
1)
From the PFD Page (one display) or PFD (two display), press the
HDG/
ROLL
Softkey (if necessary). The Heading Box is highlighted.
2)
Turn the
FMS
Joystick to select the desired heading, and press the
ENT
Key. The Selected Heading is shown to the left of the HSI.
Holding the CWS Button and hand-flying the aircraft does not change
the Selected Heading. The Integrated Autopilot guides the aircraft back to
the Selected Heading upon release of the CWS Button.
Turns are commanded in the same direction as Selected Heading Bug
movement, even if the Bug is turned more than 180˚ from the present
heading (e.g., a 270˚ turn to the right). However, Selected Heading
changes of more than 330˚ at a time result in turn reversals.
Содержание G300 for Cessna SkyCatcher
