Garmin G1000 Series Скачать руководство пользователя страница 54

Страница: 54 / 338

Garmin G1000 Pilot’s Guide for the Diamond DA40

190-00592-00 Rev. A

2-26

PRIMARY FLIGHT DISPLAY

To enable/disable topo data:

1. Press the

INSET

softkey.

2. Press the

TOPO

softkey to display topographic

land colors, which represent the rise and fall

of land elevation.

3. Press the

TOPO

softkey again to remove topo

data from the map.

NOTE:

When topographic data is removed from

the display, all cartographic data is automatically

removed and the Jeppesen Nav Data is presented
on a black background.

To enable/disable terrain data:

1. Press the

INSET

softkey.

2. Press the

TERRAIN

softkey to display color-coded

terrain tiles, which are based upon the aircraft

current altitude. A mountain icon appears above

the zoom range at the lower right corner of the

map, showing that terrain is selected.

Red

(warning) – Land elevation is within 100

ft of the aircraft current altitude or above.

Yellow

(caution) – Land elevation is greater

than 100 ft to 1,000 ft below aircraft alti-
tude.

Black

– Land elevation greater than 1,000 ft

below aircraft altitude.

3. Press the

TERRAIN

softkey again to remove the

terrain data from the map.

NOTE:

Terrain data is not displayed when the

aircraft latitude is greater than 75˚ N or 60˚ S.

NOTE:

Refer to the Appendix for more details

about terrain.

NOTE:

Refer to the Optional Equipment section

for more details about weather options.

To enable/disable Stormscope (optional),

NEXRAD (optional), or XM lightning

(optional) data:

1. Press the

INSET

softkey. Press the

STRMSCP

(optional),

NEXRAD

(optional), or

XM LTNG

(optional) softkey to display weather informa-

tion.

2. Press the

STRMSCP, NEXRAD,

XM LTNG

soft-

key again to remove the weather information

from the map.

To pan the map:

NOTE:

The

joystick

on the PFD operates inde-

pendently from the one on the MFD.

1. Push in the

joystick

to display the panning pointer.

This allows the pilot to move the map beyond its

current limits without adjusting the range.

2. Push in and move the

joystick

to pan the map

in the general direction of the desired location.

When the pointer is placed on an object, the name

of the object is highlighted for approximately four

seconds (even if the name was not originally

displayed on the map). This feature applies to

everything displayed on the map except for route

lines.

3. Push in the

joystick

again to cancel the panning

function and return to the present position on

the map.

NOTE:

The airspace boundary stays highlighted

for approximately four seconds before returning
to normal shading.

Содержание G1000 Series



















































































































































































































































































































































Результаты поиска

Содержание G1000 Series

Отзывы:

Похожие инструкции для G1000 Series

Бренды по названию

Популярные бренды

Garmin G1000 Series, Руководство пилота

Результаты поиска

Содержание G1000 Series

Отзывы:

Похожие инструкции для G1000 Series

Бренды по названию

Популярные бренды