Garmin G1000 Series Скачать руководство пользователя страница 171

Страница: 171 / 338

Garmin G1000 Pilot’s Guide for the Diamond DA40

190-00592-00 Rev. A

7-37

MULTI FUNCTION DISPLAY

Selecting the Nearest Airport as a Direct-to
Destination

The Direct-to Page always displays the nearest airports

(from the present position) on the NRST ﬁeld.

To select a nearby airport as a Direct-to
destination:

1. Press the

Direct-to

key. The Direct-to Page is dis-

played with the destination ﬁeld highlighted.

2. Turn the

large FMS

knob to highlight the near-

est airport ﬁeld.

3. Turn the

small FMS

knob to display a window

showing up to nine nearby airports.

4. Continue turning the

small FMS

knob to scroll

through the list and highlight the desired air-
port.

5. Press the

ENT

key to conﬁrm the selected

waypoint, and again to activate a Direct-to.

Figure 7-23 Nearest Airport Direct-to

Shortcuts

Shortcuts are available when using the

Direct-to

key,

allowing the pilot to bypass the use of the

small

and

large

FMS

knobs. Any time a waypoint ﬁeld is highlighted

and then the

Direct-to

key is pressed, the highlighted

waypoint will be the direct-to waypoint.

The following are “candidates” for Direct-to

waypoints:

• The highlighted waypoint when map panning

with the MFD map panning pointer.

• The highlighted waypoint identiﬁer ﬁeld on any

page.

• The airport waypoint page airport when on

the airport information, arrival, departure, or
approach pages.

• The waypoint displayed on the VOR waypoint

page.

• The waypoint displayed on the NDB waypoint

page.

• The waypoint displayed on the intersection

waypoint page.

• The waypoint displayed on the user waypoint

page.

Содержание G1000 Series



















































































































































































































































































































































Результаты поиска

Содержание G1000 Series

Отзывы:

Похожие инструкции для G1000 Series

Бренды по названию

Популярные бренды

Garmin G1000 Series, Руководство пилота

Результаты поиска

Содержание G1000 Series

Отзывы:

Похожие инструкции для G1000 Series

Бренды по названию

Популярные бренды