Garmin FUSION MS-ARX70, Инструкция по эксплуатации

Страница: 8 / 10

4 Carefully pry the battery from the battery compartment.
5 Insert the new battery into the compartment with the positive side facing down.
NOTE: Do not damage or lose the O-ring gasket.
6 Align the battery compartment in the remote control so the line points to .
7 Press the battery compartment down into the remote control, and rotate the compartment clockwise until
the line points to .
8 Make sure the battery compartment is fully seated in the remote control.
9 Place the remote control in the mount, and rotate until it clicks.
Remote Specifications
Weight
With mount: 30 g (1.6 oz.)
Without mount: 25 g (0.88 oz.)
Battery type User-replaceable CR2032 (3 V)
Battery life (typical use) At least 3 years
Operating temperature range From 0° to 50°C (from 32° to 122°F)
Storage temperature range From -20° to 70°C (from -4° to 158°F)
Radio frequency/protocol 2.4 GHz @ 6.42 dBm nominal
ANT wireless range Up to 10 m (33 ft.)
Compass-safe distance 5 cm
Water rating IEC 60529 IPX6 and IPX7
1
Troubleshooting
The remote will not connect to the stereo
• Make sure the stereo is in Bluetooth discoverable mode.
• Move closer to the stereo, and attempt to connect to it again (
Connecting the ARX70 Remote to a Stereo,
page 2 ).
• Disable Bluetooth discoverable mode on the stereo, and then re-enable it.
The LED does not light when I press a button
The battery is low or dead or is installed improperly. Replace the battery ( Replacing the Battery, page 3 ).
1
Withstands incidental exposure to water of up to 1 m for up to 30 min. and is protected against powerful jets of water. For more information go to garmin.com
/waterrating .
4 Remote Specifications