Garmin fenix, Руководство пользователя

Страница: 5 / 97

Introduction
WARNING
Always consult your physician before you begin or modify any
exercise program.
See the
Important Safety and Product Information guide in the
product box for product warnings and other important
information.
Getting Started
When using your device the first time, you should complete
these tasks to set up the device and get to know the basic
features.
1
Charge the device ( page 1 ).
2
Register the device ( page 11 ).
3
Learn about the sensor data and modes ( page 1 ).
4
Acquire satellites ( page 4 ).
5
Go for a hike ( page 2 ).
6 Create a waypoint ( page 3 ).
Charging the Device
NOTICE
To prevent corrosion, thoroughly dry the contacts and the
surrounding area before charging or connecting to a computer.
The device is powered by a built-in lithium-ion battery that you
can charge using a standard wall outlet or a USB port on your
computer.
1
Plug the USB end of the cable into the AC adapter or a
computer USB port.
2 Plug the AC adapter into a standard wall outlet.
3
Align the left side of the charging cradle
À
with the groove on
the left side of the device.
4
Align the hinged side of the charger
Á
with the contacts on
the back of the device.
When you connect the device to a power source, the device
turns on.
5
Charge the device completely.
Keys
À
Select to turn the backlight on and off. Hold to turn the
device on and off.
Á
Select to scroll through the data pages, options, and
settings.
Â
Select to scroll through the data pages, options, and
settings.
Ã
Select to return to the previous screen. Hold to view
the status page.
Ä
Orange key Select to open the menu for the current screen. Select
to choose an option and to acknowledge a message.
Hold to mark a waypoint.
Viewing the Status Page
You can quickly switch to this page to view the time of day,
battery life, and GPS status information from any other page.
Hold .
Customizing the Arrow Keys
You can customize the hold function of and . This
customization is saved with the active profile ( page 2 ). For
example, if the marine profile is active, you can customize the
hold function to mark a man overboard (MOB) location.
1
Select the Orange key.
2
Select Setup > System > Hold Keys .
3
Select Hold Up or Hold Down .
4 Select an option.
Sensors
Viewing the Sensor Data
You can quickly access real-time data for the compass,
altimeter, barometer, and temperature sensors. This default
sensor mode is called On Demand mode in the device sensor
settings.
NOTE: These data pages automatically time out to low-power
(watch) mode.
NOTE: This data is not recorded to the device ( page 4 ).
1
From the time of day page, select or .
Introduction 1