Page 2-18
G1000/GFC 700 Post Installation Checkout Procedure - Hawker / Beechcraft King Air C90
Revision 5
190-00682-00
2.12
TAWS Configuration
Follow this procedure to activate the TAWS option. A TAWS Enable Card, as specified on General
Arrangement Drawing 005-00375-22, will be required for this procedure.
1. If not applied, apply power to the G1000 system.
2. Remove power from PFD1, PFD2 and MFD by opening the PFD1 PRI/SEC, PFD2 and MFD
circuit breakers.
3. Insert the TAWS Unlock card in the upper slot of PFD1.
4. While holding the
ENT
key on the PFD1, PFD2 and MFD (for MFD press and hold the farthest
right pushbutton), restore power to the displays.
5. When the words
appear in the upper left corner of the displays,
release the
ENT
key.
6. On PFD1, go to the System Upload page using the small PFD1 FMS knob.
7. Activate the cursor. Use the small PFD1 FMS knob to select
CONFIGURATION FILES
in the
AIRFRAME field and press the PFD1
ENT
key.
8. Highlight
the
FILE
field. Use the PFD1 small FMS knob to select the ‘
Enable TAWS
’ option and
press the PFD1
ENT
key. Once the option is selected, the configuration files in the PRODUCT
field will be displayed. All files should be checked. If not, press the
CHK ALL
softkey.
9. Press
the
LOAD
softkey.
10. Monitor the status of the upload. When the upload is finished, press the PFD1
ENT
key to
acknowledge the upload complete confirmation.
11. View the SUMMARY field and ensure that the item is ‘COMPLETE’.
12. De-activate the cursor.
13. Power down the system and remove the TAWS Enable card from PFD1.
