Garmin Apollo SL50, Руководство пользователя

Страница: 83 / 134

6. Turn the
Large
knob to move to the E or W
direction field. Turn the Small knob to select E
or W and then press
ENT
. The MSG annunciator
will flash and a message will note that you have
selected manual magnetic variation.
Mag Variation: Manual 19
0
E
Flight Timer Trigger
The following procedure is used to edit the flight
timer trigger speed. The flight timer may be set to
start at power-up, or when the ground speed
exceeds from 10 to 500 knots. The default (factory)
setting is 60 knots. The feature may also be turned
off.
1. Press the SYS key.
Flt Timer Trigger: At 60kts
2. Turn the
Large
knob to reach the Flight Timer
Trigger page and then press SEL .
Flt Timer Trigger: At 60kts
3. Turn the Small knob to select the speed value,
“At Power On,” or “OFF” and then press
ENT
.
Direct-To Entry Options
When you use Direct-To, the Active flight plan
(and
the From, To, Next information) is
automatically updated.
If you use Direct-To to center the CDI needle for
the current “To” waypoint, or skip past the To
waypoint to another waypoint already in the Active
flight plan, the current leg number of the Active
flight plan will be updated, if needed, so that the
Direct-To waypoint matches the current “To”
waypoint. In these cases, the Direct-To Entry
Option is not a factor.
73
System Functions
ENT
SEL
SYS
ENT