background image

19

190-00357-01 Rev H

4.  The unit will provide course guidance only on the 

inbound side of the holding pattern, however guid-
ance is provided along the entire holding pattern 
via roll steering-equipped autopilots. When leav-
ing the holding pattern to re-fly the approach (or 
another approach) press the 

PROC

 key to “Select 

Approach?” or “Activate Approach?” as previously 
described. (Or, use the 

direct-to

 key to select 

another destination). 

Annunciation

Description

LPV

Localizer Performance with Vertical guidance 

(LPV) approach.  Fly to LPV minimums. A yellow 

background indicates that the approach is safe 

to continue but a downgrade to LNAV may 

occur. 

LP

LP indicates Localizer Performance with no verti-

cal guidance. 

LP +V

LP +V indicates Localizer Performance with ad-

visory vertical guidance. Fly LP minimums down 

to the MDA and missed approach location. This 

annunciation is available in SW Ver 5.10, or later. 

L/VNAV

Lateral Navigation and Vertical Navigation 

(LNAV/VNAV) approach. Fly to LNAV/VNAV 

minimums. 

LNAV+V

GPS approach using published LNAV minima. 

Advisory vertical guidance is provided. 

LNAV

Lateral Navigation approach. Fly to LNAV 

minimums. 

MAPR

Missed Approach indicates the system is provid-

ing missed approach integrity and CDI full-scale 

deflection 

±

0.3 NM. 

ENR

En route, CDI full-scale deflection is 2.0 NM or 

current CDI scale selection, whichever is smaller. 

TERM

Terminal, CDI full-scale deflection is 1.0 NM or 

current CDI scale selection, whichever is smaller. 

DPRT

Departure, indicates the system is using non-

precision approach integrity. HAL = 0.3 and CDI 

full-scale deflection is 0.3 NM. 

OCN

Oceanic, CDI full-scale deflection is 2.0 NM. 

LOW ALT

(lower window)

For LNAV+V, LNAV/VNAV, or LPV approaches, 

the LOW ALT annunciation indicates the 

aircraft’s estimated height is lower than the 

Final Approach Waypoint height by more than 

the current VPL plus 50 meters. This annuncia-

tion will not be active when TAWS or Terrain is 

operational. 

APPROACHES

Содержание 500W Series

























Отзывы: