2 - NAV PAGES
31
190-00356-00 Rev B
Default Nav Page
Selecting Desired On-Screen Data
At the bottom of the
default NAV page
you’ll find
six user-definable fields which display the data you’ll
need as your flight progresses. By default these fields
display: distance to destination (DIS), desired track
(DTK), bearing to destination (BRG), ground speed
(GS), ground track (TRK) and estimated time en route
(ETE). However, each of these fields can be custom-
tailored to your preferences by selecting a different
data item. Available data items include:
• Bearing to destination (BRG)
• Distance to destination (DIS)
• Desired track (DTK)
• En route safe altitude (ESA)
• Estimated time of arrival (ETA)
• Estimate time en route (ETE)
• Fuel Flow (FLOW)
(When Configured)
• Ground speed (GS)
• Minimum safe altitude (MSA)
• Track angle error (TKE)
• Ground track (TRK)
• Vertical speed required (VSR)
• Cross track error (XTK)
If no flight plan or direct-to destination has been
selected only speed, track, altitude and minimum
safe altitude data may be displayed. All other data
types will appear as blank lines—on the
default NAV
page
—until a destination is selected.
To select a different data item for any data field:
1. Startng wth the default NAV page, press the
MENU
key to dsplay an optons menu.
2. The “Change Felds?” opton s already hgh-
lghted, so press
ENT
to select ths opton.
3. Use the
large right
knob to hghlght the data
field you wsh to change.
4. Turn the
small right
knob to dsplay the lst
of avalable data tems. Contnue turnng the
small right
knob to select the desred data
tem from the lst.
5. Press
ENT
to select the desred data tem and
return to the default NAV page.
6. Press the
small right
knob momentarly to
remove the cursor from the page.
190-00356-00_0B.indd 31
9/7/2007 2:49:07 PM
