Garmin 400W Series Скачать руководство пользователя страница 11

INTRODUCTION

1

190-00356-00 Rev B

Model Descriptions

This guide covers the operation of the GPS 400W, 

GNC 420W, GNC 420AW, GNS 430W, GNS 430AW. 
In general, all models will be referred to as the 

400W-

series

, except where there are physical or operational 

differences. The 400W-series

 

units are 6.25” wide and 

2.66” high. The display is a 240 by 128 pixel color LCD. 
The units include two removable data cards, one with 
a Jeppesen database (inserted in the left-most card slot) 
and the second being a Terrain database (inserted in the 
right-most card slot). 

GPS 400W

The GPS 400W has a WAAS GPS engine and is TSO 

C146a certified for primary domestic, oceanic, and 
remote navigation including en route, terminal, and 
non-precision approaches, and approaches with vertical 
guidance, such as LPV and LNAV/VNAV. The GPS 400W 
can simultaneously give aviators vital approach infor-
mation and weather and traffic data in relation to their 
position on a color moving map display. Thanks to a 
high-contrast color display, the information can be easily 
read from wide viewing angles even in direct sunlight. Its 
color moving map features a built-in database that shows 
cities, highways, railroads, rivers, lakes, coastlines, and a 
complete Jeppesen database. The huge Jeppesen database 
(that can be updated with a front-loading data card) 
contains all airports, VORs, NDBs, Intersections, FSS, 
Approach, DPs/STARs, and SUA information. 

Pilots will enjoy the GPS 400W as an MFD, especially 

when it is coupled with traffic, lightning detection, and 
weather interfaces like Ryan TCAD, TIS from the Garmin 
GTX 330 Mode S transponder, or L3 SKYWATCH™, or 
STORMSCOPE

®

 WX 500. With the PC-based FDE pre-

diction program, the GPS 400W may be used for oceanic 
or remote operations. For the latest in graphical and 
textual weather information, the GPS 400W can connect 
to XM Satellite Radio’s XM WX Weather Service via the 

GDL 69/69A datalink receiver. 

GNC 420W/420AW

The GNS 430W/AW includes all of the features of 

the GPS 400W, and also includes TSO’d airborne VHF 
communications transceiver. This multipurpose unit is 
available with either a 10-watt (GNS 420W) or 16-watt 
28 V dc (GNS 420AW) COM. 

GNS 430W/430AW

The GNS 430W/AW includes all of the features of the 

GPS 420W/420AW, and also includes TSO’d airborne 
VOR/Localizer and Glideslope receivers. This multipur-
pose unit is available with either a 10-watt (GNS 430W) 
or 16-watt 28 V dc (GNS 430AW) COM. 

Takeoff Tour

This Takeoff Tour is intended to provide a brief 

introduction of the 400W-series major features. The 
rest of this manual describes these features, and others, 
in additional detail. Use this guide, as needed, to learn 
or review the details regarding a particular feature. The 
Index may be used to quickly locate the information 
you want. Before flying with your 400W-series unit, take 
the time to review the information in the manuals and 
practice with the trainer. 

After you’re familiar with the basics, some suggested 

reading within the Reference section includes: 

• Flight plan features - Section 4
• Waypoint information pages (database information) 
- Section 6
• IFR procedures - Section 5
• Unit settings (configuring the unit to your prefer-
ences) - Section 9

If you’re unable to locate the information you need, 

we’re here to help! Garmin’s Customer Service staff is 
available during normal business hours (U.S. Central 
time zone) at the phone and fax numbers listed on page 
ii. You can also reach us by mail (see page ii) or at our 
web site address: www.garmin.com. 

Model Descriptions

190-00356-00_0B.indd   1

9/7/2007   2:48:56 PM

Содержание 400W Series















































































Отзывы: