Garland XE362S-2L Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 88

background image

Part # JIBSM08 Rev 7 (08/04/09)

Page 32

3. Press to enter the Programming Mode.

“PROGRAMMING MODE MENU ITEMS” is displayed.

4. Press three, (3) times. “PROGRAMMING MODE PROD

NAME LIB” is displayed.

5. Press . “PROD NAME LIB” is displayed.

6. Press . “PROD NAME LIB” will be displayed on the top

line, with a flashing cursor on the bottom line.

7. Use and to change the character, (A-Z, 1-9,

<space>, and hyphen are available). Use and to

move the cursor position.

8. Press to save the new product name. “SAVE LIBRARY

ADD” is displayed.

9. Press to save. “PROGRAMMING MODE PROD NAME

LIB” is displayed.

10. Press to exit.

To Modify a Product Name in Library:

1. Press and hold for three, (3) seconds. “ENTER CODE” is

displayed.

2. Using the Product buttons, 0-9 enter the code, (1251).

“ENTER CODE **** ” is displayed.

3. Press to enter the Programming Mode.

“PROGRAMMING MODE MENU ITEMS” is displayed.

4. Press three, (3) times. “PROGRAMMING MODE PROD

NAME LIB” is displayed.

5.  Press   . “PROD NAME LIB” is displayed.
6.  Use   and   to select Product Name to be modified.
7.  Press   . The first character in the Product Name will

start flashing.

8. Use and to change the character, (A-Z, 1-9,

<space>, and hyphen are available). Use and to

move the cursor position.

9.  Press  . “SAVE LIBRARY ADD” is displayed.
10. Press  . “SAVE LIBRARY MODIFY” is displayed.
11. Press   to save. “PROGRAMMING MODE PROD NAME

LIB” is displayed.

12. Press to exit.

PROGRAMMING

continued

Service Mode

To Change SCK Address:

1. Press and hold for three, (3) seconds. “ENTER CODE” is

displayed.

2. Using the Product buttons, 0-9 enter the code, (1251).

“ENTER CODE **** ” is displayed.

3. Press to enter the Programming Mode.

“PROGRAMMING MODE MENU ITEMS” is displayed.

4. Press three, (3) times. “PROGRAMMING MODE SERVICE

MODE” is displayed.

5.  Press   one, (1), time. “Address XX” is displayed.
6.  Use   and   to change to the desired SCK Address.
7.  Press   to save the changes.
8.  Press   to return to “PROGRAMMING MODE SERVICE

MODE”

9. Press again to exit.

To Perform Limit Switch Test:

1. Press and hold for three, (3) seconds. “ENTER CODE” is

displayed.

2. Using the Product buttons, 0-9 enter the code, (1251).

“ENTER CODE **** ” is displayed.

3. Press to enter the Programming Mode.

“PROGRAMMING MODE MENU ITEMS” is displayed.

4. Press three, (3) times. “PROGRAMMING MODE SERVICE

MODE” is displayed.

5. Press two, (2), times. “PLATEN” (along with the position

of each switch), is displayed.

6. Use and to move the platen up and down. Check

for correct switch operation:

Correct Switch Operation:

Platen Up -

U (Closed) L (Open)

Platen Down -

U (Open) L (Closed)

7. Press to return to “PROGRAMMING MODE SERVICE

MODE”.

8. Press again to exit.

«
...
30
31
32
33
34
...
»

Содержание XE362S-2L

























































































Отзывы:

Нет отзывов

Похожие инструкции для XE362S-2L

Бренд: Mafell Страницы: 11

Бренд: SafeCourt Страницы: 20

Prestige Pro PR0665-3

Бренд: Napoleon Страницы: 3

I TUTTOFARE GRIGLIATUTTO XL

Бренд: Kasanova Страницы: 22

Бренд: Triton Страницы: 84

Бренд: BeefEater Страницы: 7

Бренд: Landmann Страницы: 75

Бренд: Margaritaville Страницы: 12

Бренд: Princess Страницы: 36

DRILL BOOT 42114

Бренд: Guardian Страницы: 60

Бренд: VonHaus Страницы: 36

Бренд: Hitachi Страницы: 82

Бренд: Milwaukee Страницы: 11

Бренд: SEVERIN Страницы: 86

Бренд: SEVERIN Страницы: 1

Бренд: Monogram Страницы: 12

Бренд: FLORABEST Страницы: 30

Бренд: FLORABEST Страницы: 34

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды