Garland XE362S-2L Скачать руководство пользователя страница 26

Страница: 26 / 88

Page 26

PROGRAMMING

continued

Menu Items...

To Change the Cook Time of a Product:

1. Press and hold for three, (3) seconds. “ENTER CODE” is

displayed.

2. Using the Product buttons, 0-9 enter the code, (1251).

“ENTER CODE **** ” is displayed.

3. Press to enter Programming Mode. “PROGRAMMING

MODE MENU ITEMS” is displayed.

4. Press . “MENU ITEMS STANDBY” is displayed.

5.  Use   and   to choose the desired Menu Item.
6.  Press   to display “(MENU ITEM) COOK TIME XX:XX”
7.  Use   and   to adjust the cook time.
8.  Press   to save the changes.
9.  Press    twice to exit.

To Turn Platen, (2-Sided), Cooking On/Off:

1. Press and hold for three, (3) seconds. “ENTER CODE” is

displayed.

2. Using the Product buttons, 0-9 enter the code, (1251).

“ENTER CODE **** ” is displayed.

3. Press to enter the Programming Mode.

“PROGRAMMING MODE MENU ITEMS” is displayed.

4. Press . “MENU ITEMS STANDBY” is displayed.

5. Use and to choose the desired Menu Item.
6. Press twice to display “(MENU ITEM) UPPER PLATEN

YES/NO “.

7.  Use   and   to turn upper platen on or off.
8.  Press   to save the changes.
9.  Press    twice to exit.

To Change Upper Platen Set Temperature:

1. Press and hold for three, (3) seconds. “ENTER CODE” is

displayed.

2. Using the Product buttons, 0-9 enter the code, (1251).

“ENTER CODE **** ” is displayed.

3. Press to enter the Programming Mode.

“PROGRAMMING MODE MENU ITEMS” is displayed.

4. Press . “MENU ITEMS STANDBY” is displayed.

5. Use and to choose the desired Menu Item.

6 Press three, (3) times to display “(MENU ITEM) UPPER

TEMP XXX” displayed in °F or °C.

7. Use and to change the set temperature to the

desired value.

8. Press to save the changes.
9. Press twice to exit.

To Change Grill Set Temperature:

1. Press and hold for three, (3) seconds. “ENTER CODE” is

displayed.

2. Using the Product buttons, 0-9 enter the code, (1251).

“ENTER CODE **** ” is displayed.

3. Press to enter the Programming Mode.

“PROGRAMMING MODE MENU ITEMS” is displayed.

4. Press . “MENU ITEMS STANDBY” is displayed.

5. Use and to choose the desired Menu Item.
6. Press four, (4) times to display “(MENU ITEM) GRILL

TEMP XXX” displayed in °F or °C.

7. Use and to change the set temperature to the

desired value.

8. Press to save the changes.
9. Press twice to exit.

To Change Product Gap Setting:

1. Press and hold for three, (3) seconds. “ENTER CODE” is

displayed.

2. Using the Product buttons, 0-9 enter the code, (1251).

“ENTER CODE **** ” is displayed.

3. Press to enter the Programming Mode.

“PROGRAMMING MODE MENU ITEMS” is displayed.

4. Press . “MENU ITEMS STANDBY” is displayed.

5. Use and to choose the desired Menu Item.
6. Press five, (5) times to display “GAP XXX” displayed in

inches or mm.

7. Use and to change the gap setting to the desired

value.

8. Press to save the changes.
9. Press twice to exit.

Содержание XE362S-2L

























































































Результаты поиска

Содержание XE362S-2L

Отзывы:

Похожие инструкции для XE362S-2L

Бренды по названию

Популярные бренды

Garland XE362S-2L, Руководство по обслуживанию

Результаты поиска

Содержание XE362S-2L

Отзывы:

Похожие инструкции для XE362S-2L

Бренды по названию

Популярные бренды