background image

 5

 

Safety Notices

CODE

n

Warning

Authorized Service Representatives are obligated to 

follow industry standard safety procedures, including, 

but not limited to, local/national regulations for 

disconnection / lock out / tag out procedures for all 

utilities including electric, gas, water and  steam.

PERSONAL PROTECTION

 DANGER

All utilities (gas, electric, water and steam) must be  OFF 

to all equipment and locked out of operation according 

to national/regional, as well as company approved 

practices during servicing. Always allow unit to cool.

 DANGER

Use appropriate safety equipment during installation 

and servicing.

 DANGER

Never stand on the unit! They are not designed to 

hold the weight of an adult, and may collapse or tip if 

misused in this manner.

 DANGER

Keep power cord AWAY from HEATED surfaces. DO NOT 

immerse power cord or plug in water. DO NOT let power 

cord hang over edge of table or counter.

 DANGER

To avoid cardiac pacemaker malfunction, consult 

physician or pacemaker manufacture about effects of 

electromagnetic field on pacemaker.

n

Warning

Use caution when handling metal surface edges of all 

equipment.

n

Warning

Risk of burns from high temperatures. You may get 

burnt if you touch any of the parts during cooking.  

Surfaces close to the cooking surface including side 

panels may get hot enough to burn skin. Use extreme 

caution to avoid coming in contact with hot  surfaces 

or hot grease. Wear personal protective equipment.

CORRECT DISPOSAL OF THIS PRODUCT

This marking shown on the product 

indicates that the product should not be 

disposed as household waste or regular 

commercial waste. Instead it shall be 

handed over to the applicable collection 

point for the recycling of electrical and electronic 

equipment. By ensuring this product is disposed correctly, 

you will help prevent potential harm to the environment 

or human health, which could otherwise be caused by 

inappropriate waste handling of this product. 
For more detailed information regarding recycling of the 

product, please contact your local city office or your waste 

disposal service.

 DANGER

Induction units, sent for disposal, can be brought back 

into operation and their use must be avoided.

NOTE: The unit is built with common electrical, 

electromechanical, and electronic parts. No batteries are 

used.
NOTE: The owner and operator are responsible for the 

proper and safe disposal of the unit.

Содержание SH 3500-555













































Отзывы: