P1GCCB
Series Portable Tap Installation Guide
This document is for informational purposes only. The information in this document, believed by Garland Technology to be accurate as of the date of publication, is subject to change without notice. Garland
Technology assumes no responsibility for any errors or omissions in this document and shall have no obligation to you as a result of having made this document available to you or based upon the information it
contains. Copyright 2013 © Garland Technology LLC. All Rights Reserved.
+1 716.242.8500 ◊ Buffalo, New York ◊ Garland, Texas ◊ www.garlandtechnology.com
LED Labeling
When in the Synchronization Mode the SP LEDs will show you what speed has been synchronized for the link.
Below is a diagram and chart showing the LED operations.
SP LED 2
SP LED 4
SP LED 1
Link Activity
SP LED 3
RJ45 Ethernet
RJ45 Ethernet
SP
or
S
(Speed): When in Sync Mode only, indicates the highest established common speed across all ports of a
tap. LED’s indicate the following established speeds: [1st SPD 1G] – [2nd SPD 100M] – [3rd SPD 10M] – [4th SPD
Negotiating]
LNK
or
L
(Link/Activity): Solid when link is achieved and flashes when Ethernet activity is detected on a particular
interface.
Ordering Information
P1GCCB
Portable 10/100/1000M Copper TAP: 10/100/1000M Copper Network TAP, Single Power Supply,
unique Synchronization Mode, passes data-link layer errors, and Compact Portable footprint
RMP-1U
Rack Mount Plate: 1U holds up to four (4) Portable TAPs
RMS-1U
Rack Mount Shelf: 1U holds up to four (4) Portable TAPs
