Garland MWE3S Скачать руководство пользователя страница 30

Страница: 30 / 36

INSTALLATION/OPERATION MANUAL

GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION

PART #4521777 (08/18/09)

Page 30

CONTROL PROGRAMMING

(continued)

To Add NEW Menu Items

The following programming instructions serves as a GUIDE for

programming the basic settings for CLAM menu items.

1. PRESS and HOLD the

button for approximately 3

seconds. Controller will display previously selected
menu item and its corresponding item number.

2. PRESS

the or

button until “Opt menu # - CLAM” is

displayed on the controller.

3. PRESS

the button. The controller will display

“PRODUCT”

4. PRESS and HOLD the

button. The currently select

menu item name will begin to fl ash.

5. To spell out the product name:

a. Use

the or

arrow buttons to scroll through

the character library.

b. PRESS or

to scroll right or left.

c. PRESS the

button to save the new menu item

name.

6. PRESS

the button. “Display Active” will be displayed.

7. PRESS the

button. “NO” will begin to fl ash.

8. PRESS the

button. “NO” will change to “YES”.

9. PRESS the

button to save the new setting.

10. PRESS the

button. “GRILL SETPT” will be displayed.

11. PRESS the

button. The temperature will begin to

fl ash.

12. Using the

button, change the temperature set

point to the new desired temperature.

13. PRESS the

button to save the new temperature set

point.

14. PRESS the

button. “PLATSETPT” will be displayed.

15. PRESS the

button. The temperature will begin to

fl ash.

16. Using the

button, change the temperature set

point to the new desired temperature.

17. PRESS the

button to save the new temperature set

point.

18. PRESS the

button until “GAP MULTI/PR START”

appears in the display.

19. PRESS the

button. The gap setting will begin to

fl ash.

20. Using the

and DOWN button, change the gap

setting to the desired setting.

21. PRESS the

button to save the new gap setting.

22. PRESS the

button 2X to exit and return to the normal

operating mode.

To Restore Factory Defaults for All Product Menu Items

1. With the controller display ON and either displaying the

current menu item or displaying “OFF,” PRESS and HOLD
the

button for approximately 3 seconds. Controller

will display previously selected menu item and its
corresponding item number OR “Standby / Menu Item.”

2. PRESS

the AND

arrow buttons TOGETHER.

“CONFIGURE” will appear in the display.

3. PRESS

the arrow button. “Setup” will appear in the

display

4. PRESS

the button. “Temperature Unit” will appear in

the display.

5. PRESS

the button 6x. The controller will display

“Reload Defaults – NO.”

6. PRESS

the button. “NO” will begin to fl ash.

7. PRESS the

button. “NO” will change to “YES”.

8. PRESS the

button. The system will Reload the MENU

items to factory default settings.

9. Wait 15-20 seconds. The control then automatically

returns to OFF mode.

To Restore Factory Defaults for All Functions

1. Ensure the main power is turned off by turning the

main power switch to the OFF mode.

2. PRESS

the AND

arrow buttons TOGETHER, while

cycling main power ON with the main power switch.
The control will display “PASSWORD”

3. Within 3-5 seconds, press the following keys in this

sequence:

4. Upon successful completion, the controller will display

FULL DEFAULTS

5. Wait 15-20 seconds. The control then automatically

returns to OFF mode.

Содержание MWE3S





































Результаты поиска

Содержание MWE3S

Отзывы:

Похожие инструкции для MWE3S

Бренды по названию

Популярные бренды

Garland MWE3S, Инструкция по установке и эксплуатации

Результаты поиска

Содержание MWE3S

Отзывы:

Похожие инструкции для MWE3S

Бренды по названию

Популярные бренды