background image

PART #4521777 (08/18/09)

GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION 

INSTALLATION/OPERATION MANUAL

Page 29

CONTROL PROGRAMMING 

(continued)

To change the grill upper platen set point temperature

NOTE: Grill temperature set points are preset in the controller to the 
currently required standard.  You should not change this set point to any

temperature other than what is shown on page <?>.

1. Using 

the   or 

 button, select the menu item that 

requires a temperature change.

2.  PRESS and HOLD the 

 button for approximately 3 

seconds. Controller will display previously selected 
menu item and its corresponding item number.

3. PRESS 

the   button. The controller will display 

“Product”. 

4. PRESS 

the   or 

 button until “Platen SetPt” is 

displayed on the controller. 

5. PRESS 

the   button. The “PLATEN SET POINT” will 

begin to fl ash.

6. Using 

the   or 

 button, change the temperature set 

point to the new desired temperature.

7. PRESS 

the   button to save the new temperature.

8. PRESS 

the   2X to return to normal operating mode.

To Change the MUST REMOVE IN time

1. Using 

the   or 

 button, select the menu item that 

requires a cook time change.

2.  PRESS and HOLD the 

 button for approximately 3 

seconds. Controller will display previously selected 
menu item and its corresponding item number.

3. PRESS 

the   button. The controller will display 

“Product”. 

4. PRESS 

the   or 

 button until “Must Remove In” is 

displayed on the controller. 

5. PRESS 

the   button. The seconds will begin to fl ash. 

6. Using 

the   or 

 arrow buttons to change the Must 

Remove In time to the new desired time.

7. PRESS 

the   button to save the new time.

8. PRESS 

the   2X to return to normal operating mode.

To Change the Toast Buns time

1. Using 

the   or 

 button, select the menu item that 

requires a cook time change.

2.  PRESS and HOLD the 

 button for approximately 3 

seconds. Controller will display previously selected 
menu item and its corresponding item number.

3. PRESS 

the   button. The controller will display 

“Product”. 

4. PRESS 

the   or 

 button until “Toast Buns Time” is 

displayed on the controller. 

5. PRESS 

the   button. The seconds will begin to fl ash. 

6. Using 

the   or 

 button, change the Toast Buns Time 

to the new desired time.

7. PRESS 

the   button to save the new time.

8. PRESS 

the   2X to exit and return to normal operating 

mode.

 

To Change the Toast Buns Alarm (Auto / Manual)

1. Using 

the   or 

 arrow buttons, select the menu item 

that requires a cook time change.

2.  PRESS and HOLD the 

 button for approximately 3 

seconds. Controller will display previously selected 
menu item and its corresponding item number.

3. PRESS 

the   button. The controller will display 

“Product”. 

4. PRESS 

the   or 

 button until “Toast Buns Alarm” is 

displayed on the controller. 

5. PRESS 

the   button. The “AUTO” or “MANUAL” will 

begin to fl ash.

6. Using 

the   or 

 arrow buttons to change the 

“MANUAL” to “AUTO” or “AUTO” to “MANUAL”.

7. PRESS 

the   button to save the new setting.

8. PRESS 

the   2X to exit and return to normal operating 

mode.

Содержание MWE3S





































Отзывы: